User Contributed                                           MET/CAL PROCEDURE
=============================================================================
INSTRUMENT:            Ametek 1964:Digistrobe
DATE:                  30-May-96
AUTHOR:                User Contributed
REVISION:              0
ADJUSTMENT THRESHOLD:  70%
NUMBER OF TESTS:       16
NUMBER OF LINES:       139
CONFIGURATION:         HP 5335A
=============================================================================
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4 CON
  1.001  ASK-   R     N              P             M              F        W
  1.002  ASK+                                          X
  1.003  IEEE         [@5335]IN
  1.003  IEEE         [@5335][TERM LF]
  1.004  IEEE         [@5335]FN1,AF1,MS60,GA1;
  1.004  IEEE         [@5335]TR1,AT.2;
  1.005  HEAD         ÍÍ INITIAL CONDITIONS ÍÍ
  1.006  DISP         This procedure requires this use of the
  1.006  DISP         photovoltaic cell and the HP 5335A counter.
  1.007  DISP         Tape the photocell to the front of the UUT.
  1.008  DISP         Connect the output of the photocell to the
  1.008  DISP         INPUT A on the HP 5335A counter
  1.009  HEAD         {}
  1.010  HEAD         {ÉÍÍÍÍÍÍÍÍÍÍÍ»}
  1.011  HEAD         {º RPM Tests º}
  1.012  HEAD         {ÈÍÍÍÍÍÍÍÍÍÍͼ}
  1.013  HEAD         ÍÍ RPM Tests ÍÍ
  1.014  JMP          2.001
  1.015  EVAL
  2.001  DISP         Set the UUT to approximately 200 RPM.
  2.002  MEMI         Use keyboard to enter actual UUT reading in RPM.
  2.003  MEME
  2.004  IEEE         [@5335][I]
  2.005  MEME
  2.006  MEMC         ÿRPM           0.10% +1U
#!          Test Tol 0.2, Sys Tol 0.002, TUR 100.000 (>= 4.00).
  3.001  DISP         Set the UUT to approximately 500 RPM.
  3.002  MEMI         Use keyboard to enter actual UUT reading in RPM.
  3.003  MEME
  3.004  IEEE         [@5335][I]
  3.005  MEME
  3.006  MEMC         ÿRPM           0.10% +1U
#!          Test Tol 0.5, Sys Tol 0.005, TUR 100.000 (>= 4.00).
  4.001  DISP         Set the UUT to approximately 1000 RPM.
  4.002  MEMI         Use keyboard to enter actual UUT reading in RPM.
  4.003  MEME
  4.004  IEEE         [@5335][I]
  4.005  MEME
  4.006  MEMC         ÿRPM           0.10% +1U
#!          Test Tol 1, Sys Tol 0.01, TUR 100.000 (>= 4.00).
  5.001  DISP         Set the UUT to approximately 2000 RPM.
  5.002  MEMI         Use keyboard to enter actual UUT reading in RPM.
  5.003  MEME
  5.004  IEEE         [@5335][I]
  5.005  MEME
  5.006  MEMC         ÿRPM           0.10% +1U
#!          Test Tol 2, Sys Tol 0.02, TUR 100.000 (>= 4.00).
  6.001  DISP         Set the UUT to approximately 3000 RPM.
  6.002  MEMI         Use keyboard to enter actual UUT reading in RPM.
  6.003  MEME
  6.004  IEEE         [@5335][I]
  6.005  MEME
  6.006  MEMC         ÿRPM           0.10% +1U
#!          Test Tol 3, Sys Tol 0.03, TUR 100.000 (>= 4.00).
  7.001  DISP         Set the UUT to approximately 4000 RPM.
  7.002  MEMI         Use keyboard to enter actual UUT reading in RPM.
  7.003  MEME
  7.004  IEEE         [@5335][I]
  7.005  MEME
  7.006  MEMC         ÿRPM           0.10% +1U
#!          Test Tol 4, Sys Tol 0.04, TUR 100.000 (>= 4.00).
  8.001  DISP         Set the UUT to approximately 5000 RPM.
  8.002  MEMI         Use keyboard to enter actual UUT reading in RPM.
  8.003  MEME
  8.004  IEEE         [@5335][I]
  8.005  MEME
  8.006  MEMC         ÿRPM           0.10% +1U
#!          Test Tol 5, Sys Tol 0.05, TUR 100.000 (>= 4.00).
  9.001  DISP         Set the UUT to approximately 6000 RPM.
  9.002  MEMI         Use keyboard to enter actual UUT reading in RPM.
  9.003  MEME
  9.004  IEEE         [@5335][I]
  9.005  MEME
  9.006  MEMC         ÿRPM           0.10% +1U
#!          Test Tol 6, Sys Tol 0.06, TUR 100.000 (>= 4.00).
 10.001  DISP         Set the UUT to approximately 7000 RPM.
 10.002  MEMI         Use keyboard to enter actual UUT reading in RPM.
 10.003  MEME
 10.004  IEEE         [@5335][I]
 10.005  MEME
 10.006  MEMC         ÿRPM           0.10% +1U
#!          Test Tol 7, Sys Tol 0.07, TUR 100.000 (>= 4.00).
 11.001  DISP         Set the UUT to approximately 8000 RPM.
 11.002  MEMI         Use keyboard to enter actual UUT reading in RPM.
 11.003  MEME
 11.004  IEEE         [@5335][I]
 11.005  MEME
 11.006  MEMC         ÿRPM           0.10% +1U
#!          Test Tol 8, Sys Tol 0.08, TUR 100.000 (>= 4.00).
 12.001  DISP         Set the UUT to approximately 9000 RPM.
 12.002  MEMI         Use keyboard to enter actual UUT reading in RPM.
 12.003  MEME
 12.004  IEEE         [@5335][I]
 12.005  MEME
 12.006  MEMC         ÿRPM           0.10% +1U
#!          Test Tol 9, Sys Tol 0.09, TUR 100.000 (>= 4.00).
 13.001  DISP         Set the UUT to approximately 10000 RPM.
 13.002  MEMI         Use keyboard to enter actual UUT reading in RPM.
 13.003  MEME
 13.004  IEEE         [@5335][I]
 13.005  MEME
 13.006  MEMC         ÿRPM           0.10% +1U
#!          Test Tol 10, Sys Tol 0.1, TUR 100.000 (>= 4.00).
 14.001  DISP         Set the UUT to approximately 11000 RPM.
 14.002  MEMI         Use keyboard to enter actual UUT reading in RPM.
 14.003  MEME
 14.004  IEEE         [@5335][I]
 14.005  MEME
 14.006  MEMC         ÿRPM           0.10% +1U
#!          Test Tol 11, Sys Tol 0.11, TUR 100.000 (>= 4.00).
 15.001  DISP         Set the UUT to approximately 12000 RPM.
 15.002  MEMI         Use keyboard to enter actual UUT reading in RPM.
 15.003  MEME
 15.004  IEEE         [@5335][I]
 15.005  MEME
 15.006  MEMC         ÿRPM           0.10% +1U
#!          Test Tol 12, Sys Tol 0.12, TUR 100.000 (>= 4.00).
 16.001  HEAD         {}
 16.002  DISP         {ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»}
 16.002  DISP         {º THIS COMPLETES THE VERIFICATION º}
 16.002  DISP         {ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ}
 16.003  END
#! T.U.R.s less than 4.00:                  0
#! T.U.R.s estimated using RANGE value:     0
#! T.U.R.s not calculated (ASK- U):         0
#! T.U.R.s not computable at compile time:  0
#! FOR JUSTIFICATION REFER TO COMMENTS FOLLOWING EACH TEST IN THIS LISTING.